The B+S Black Rapid Fryers feature exclusively in our B+S Black Range, a staple line of the company for over 65 years. This means that these fryers have been tested time and time again. The current model, however, has a slimmer body than before. The newly upgraded and improved B+S Rapid Fryers is constructed using AISI 304 grade stainless steel, to ensure that it is virtually indestructible. Moreover, the 2mm-thick stainless steel tank guarantees it will withstand the pressures of a busy kitchen for years on end. Each B+S Black Rapid Fryer is powered by a highly effective, energy-efficient target burner to ensure even heat distribution throughout the oil; perfect for large quantity frying. Additionally, it not only assists in temperature recovery time but reduces gas consumption. The B+S Black Rapid Fryers also feature an over-temperature safety cut-out switch. This not only protects the fryer from overheating and breaking down, but it also protects the safety of your staff as well.
With a 40-litre oil capacity pan and a 24-month warrant the B+S Black Rapid Fryer can handle the busiest services over and over again. Baskets not included.
Features and Benefits
AISI 304 grade stainless steel
Stainless steel constructed pan with center cool zone
Energy-efficient target burner
Over-temperature safety switch
2mm thick stainless steel pan
Oil temperature thermostatically regulated
40L oil capacity pan
510mm x 510mm pan size
Flame failure standard
Front access to all components makes service easy
24-month warranty
Optional extras
Non-swivel rear castors
RF-1
Dimensions (L x W x H): 625mm x 970mm x 1300mm
Gas Consumption (NG / LPG): 135Mj/h / 135Mj/h
Spec SheetCAD Drawing
RF-2
Dimensions (L x W x H): 1250mm x 970mm x 1300mm
Gas Consumption (NG / LPG): 270Mj/h / 270Mj/h
Spec SheetCAD Drawing
RF-3
Dimensions (L x W x H): 1875mm x 970mm x 1300mm
Gas Consumption (NG / LPG): 405Mj/h / 405Mj/h
Spec SheetCAD Drawing
RF-4
Dimensions (L x W x H): 2500mm x 970mm x 1300mm
Gas Consumption (NG / LPG): 540Mj/h / 540Mj/h
Spec SheetCAD DrawingAISI 304 grade stainless steel
Stainless steel constructed pan with center cool zone
Energy-efficient target burner
Over-temperature safety switch
2mm thick stainless steel pan
Oil temperature thermostatically regulated
40L oil capacity pan
510mm x 510mm pan size
Flame failure standard
Front access to all components makes service easy
24-month warranty
| Dimensions | N/A |
|---|---|
| Model | Four Pan Rapid Fryer, Single Pan Rapid Fryer, Three Pan Rapid Fryer, Two Pan Rapid Fryer |
Heavy-duty cast iron J grates
Available in 3 options, bench mounted, on legs with undershelf or complete with stainless steel cabinet
Multi-setting gas valve as standard allowing for greater regulation of flame setting
Piezo ignition and flame failure device
Easy to clean fat spillage trays
Easy access to all components for servicing and adjustment
24-month warranty
AISI 304 grade stainless steel
Heavy-duty complete stainless steel frame
Powered by an efficient and low noise air forced burner
No deck cooling required
Automatic ignition system
German-made pilot and self-diagnostic system
Heavy-duty lever-action gas control allowing easy flame modulation
Safety flame failure device
Working status indicator
Australian made heavy duty tapware
Ceramic lined heat retention chamber increases cooking speed
AISI 304 grade stainless steel
Heavy-duty complete stainless steel cabinet frame
Baskets provided
2mm-thick AISI 316 marine grade tank
Overheat tan protection device fitted
Inbuilt water overflow helps remove water impurities
Australian made heavy-duty tapware
A multi-setting gas valve as standard allowing for greater regulation of flame setting
Piezo ignition and flame failure device are fitted as standard
Easy access to all components for servicing and adjustment
21-litre water capacity
24-month warranty
AISI 304 grade stainless steel
Powerful cooktop section burner comes in two pieces for easy cleaning
Multi-setting gas valve as standard allowing for greater regulation of flame setting
Heavy-duty cast iron trivets
Available in 3 options, bench mounted, on legs with undershelf or complete with stainless steel cabinet
Easy to clean fat spillage tray
Front access to all components make service easy
Heavy-duty stainless steel frame construction
Heavy-duty mild steel plate (GRP section)
Flame failure fitted as standard
Heavy-duty cast iron cooking J-grates and radiant hoods (CBR section)
Heavy-duty cast iron cooking J-grates and volcanic rocks (CGR section)